HOME > PICK UP > Work environment improvement/labor saving
Work environment improvement/labor saving
Work environment improvement/labor saving
1. Improvement of working environment
We are working on product development that will lead to improvement of the working environment in the construction industry.
We would like to introduce our products that improve the working environment, such as products that suppress the dust.
We would like to introduce our products that improve the working environment, such as products that suppress the dust.
-
AIR SHOT ONE
-Since it is a dust reduction type, it reduces dust when materials are added and sprayed.-Since it is a dry spraying method, there is almost no need to clean the equipment after the work is completed.-The packaging (bag) is 18 kg to reduce the burden of on-site work.-Since the polymer is already contained in the powder, the additional polymer in the can is no longer required so you can reduce the waste
-
PRE U-LOX DXP
-Since it is a dust reduction type, it reduces dust when materials are added.-The packaging (bag) is 18 kg to reduce the burden of on-site work.
-
Admixture injection facility for inseparable concrete in water
-Since a charging facility is used, it is possible to suppress dust during slurry production and avoid the risk of falling over due to scattering of slurry water around.
charging facility(2 set)
the view of input working
-
QUICUTTER
-Cracks can be generated in the excess concrete to suppress noise, vibration, and dust generation during pile head processing, and the work environment can be improved-Since cracks occur during root cutting, the work of removing excess concrete becomes efficient and the construction period can be shortened.
2. Labor saving
We are working on product development in response to the decrease in the number of workers in the construction industry and the rapid construction.
We would like to introduce our products and construction methods that improve work efficiency.
We would like to introduce our products and construction methods that improve work efficiency.
-
Mixing system for big volume non-shrink grout
-Mixing system (mixer) suitable for mass grouting. The number of labor and construction time at the site can be significantly reduced.
-
AIR SHOT ONE
-The dry spraying method enables long-distance pumping and thickening.
-
Admixture injection facility for inseparable concrete in water
-The automatic system of weighing and charging slurry water and admixtures by using a flow meter can reduce the charging time and workload.
charging facility(2 set)
the view of input working